Bits

Insert and power drive bits are available to meet a huge variety of fastener styles including Phillips, Slotted, Torx, Torx Plus, Torx Tamper Resistant, Torx Plus Tamper Resistant, Pozidriv, Sel-o-fit, Quadrex, Frearson, B.N.A.E., Socket Head, Square Recess, Torq-Set, MorTorq, Tri-Wing, Hi-Torque and Triple Square.


Phillips Bits

Phillips Bits

Click here to see how to select the correct Phillips point size.
Slotted Bits

Slotted Bits

Click here to see how to select the correct Slotted Bit.
Torx® Bits

Torx® Bits

Torx® fasteners are becoming more and more common in automotive and appliance assembly. Apex provides a full selection of bits for Torx screws.
Torx Plus® Bits

Torx Plus® Bits

Torx Plus® bits and fasteners feature a greater engagement area for higher torque transfer and reduced camout when driving Torx Plus® fasteners. They can provide up to 1 00% more drive cycles. Torx Plus® bits are not compatible with standard Torx® fasteners.
Pozidriv® Bits

Pozidriv® Bits

The shallow "cross" indention in the screw head identifies a Pozidriv® fastener. The Pozidriv® bit and recess design provides contact than a standard Phillips for more torque with less possibility of camout.
Sel-O-Fit® Bits

Sel-O-Fit® Bits

Sel-O-Fit® bits are designed to provide a more efficient means of driving Pozidriv® screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit® is a registered trademark of Cooper Industries.
Quadrex® Bits

Quadrex® Bits

The Phillips/square screw drive, also known as the Quadrex or SPAX screw drive, is a combination of the Phillips and Robertson screw drives. While a standard Phillips or Robertson tool can be used, there is a dedicated tool for it that increases the surface area between the tool and the fastener so it can handle more torque.
Frearson Bits

Frearson Bits

The Frearson recess is designed so that any size bit will fit any size recess. Choose bits on the basis of body diameter - the larger the screw, the larger the body diameter.
B.N.A.E Bits

B.N.A.E Bits

French recess bits. The name comes from the Bureau de Normalisation de l'Aéronautique et de l'Espace.
Socket Head Bits

Socket Head Bits

Click here to see how to select the correct SAE Socket Head.
Click here to see how to select the correct Metric Socket Head.
Square Recess Bits

Square Recess Bits

A square, also known as a Robertson, screw drive has a square-shaped socket in the screw head and a square protrusion on the tool. Both the tool and the socket have a taper, which makes inserting the tool easier, and also tends to help keep the screw on the tool tip without the user needing to hold it there.
Pipe Plug Inserts

Pipe Plug Inserts

For pipe plug inserts use SC and RP bit holders found here.
Torq-Set® Bits

Torq-Set® Bits

Torq-set is a cruciform screw drive used in torque-sensitive applications. The Torq-set head is similar in appearance to a Phillips drive in that it has a cross with 4 arms. In Torq-set however, the arms of the cross are offset from each other, so they do not align to form intersecting slots across the top of the head.
Mor Torq® Bits

Mor Torq® Bits

The Mortorq drive, developed by the Phillips Screw Company, is a format used in automotive and aerospace applications. It is designed to be a lightweight, low-profile and high-strength drive, with full contact over the entire recess wing reducing risk of stripping.
Tri-Wing® Bits

Tri-Wing® Bits

The tri-wing, also known as triangular slotted, screw drive has three radial slots. It is usually used on electronics equipment. Tri-wing, as the name suggests, is a screw with three "wings" and a small triangular hole in the center. A variation is a kind where the three "wings" are joined in the center (with no triangular hole).
Hi-Torque® Bits

Hi-Torque® Bits

The Hi-Torque recess was designed to provide very high installation and removal torques, very shallow recess for use on 120° and 130° flush fasteners in thin skins, and to reduce the need for end-load of the driver by the operator while installing and removing screws.
Triple Square Bits

Triple Square Bits

Triple square, also known as XZN, is a type of screw drive with 12 equally spaced tips, each with a 90 degree angle. Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips
Industrial Bit Kits

Industrial Bit Kits

Tool kit includes plastic carrying case with bits.

APEX FASTENERS, Inc 15858 Business Center Drive Irwindale, CA 91706 USA
APEX Fasteners supplies standard and custom screws, nut retainers, shoulder screws, plastites and taptites, all types of rivets, spring steel fasteners and special stampings, sems screws in standard, fractional or metric to electronics, aviation and other OEM industries worldwide. ApexFasteners.com custom manufactures screw machine components for electronic enclosure hardware as well as cold forming and cold headed specials for assembly and production requirements.
Toll-Free Tel: 1-800-642-1333 Tel: (626) 962-2219 Fax: (626) 626-962-7729 info@apexfasteners.com
Copyright © 2018 Apex Fasteners. Designed by Pope Productions
Parse Time: 0.073 - Number of Queries: 351 - Query Time: 0.0384861579742